Product details

　　Polymer materials, such as PP, PE, Silicone, ABS, POM, PS, etc., can be seen everywhere in daily life. The physical reliability and other characteristics of their own materials are very important for finished products. In order to meet the physical characteristics of some aspects of the final molded products, the materials need to be tested accordingly to achieve certain performance, so as to meet the needs of the finished products.

　　Product lines covered:

　　1.PP, PE, ABS, silica gel, rubber, foaming material, geotextile, coating

　　2. Automotive materials or components

　　3. Electronic product parts or materials

　　4. Electrical product parts or materials

　　5.Medical and health supplies: such as PP needle tube, infusion bag, etc

　　Test standards and services available:

　　1. Plastic raw material particles can be pressed, injected or blown as required

　　2. PP and PE raw materials can do: shore a hardness, Shore D hardness, Rockwell hardness, Babbitt hardness, tensile strength, elongation at break, tensile modulus, bending strength, bending modulus, cantilever impact strength, simply supported beam impact strength, impact strength, compression strength, compression modulus, drop weight impact strength, abrasion performance (Taber), perforation shear strength, density, melt index, thermal deformation temperature, Vicat softening point Low temperature embrittlement temperature, light transmittance, haze, mirror gloss, water absorption, chemical reagent resistance, mold shrinkage and viscosity

　　3. Plastic film can do: thickness, tensile strength, elongation at break, tear strength, pendulum tear strength, film dart impact strength, heat sealing strength, composite film stripping force, dynamic and static friction coefficient between film and sheet, mirror gloss, light transmittance, haze, film embrittlement temperature and water vapor transmittance

　　4. Geomembrane standard SH / T 1801-2016 with CNAs CMA qualification seal

　　5. YY / T 0242 and other medical standards - issue the report of Guangdong Medical Supervision Institute

　　6. Composition analysis, formula cracking, substance reverse tracking, additive content test, antioxidant content test

　　7. Formulation research and development of PP, PE and other products, small-scale trial production, formula adjustment to meet customer needs, and help customers apply for patents and other project research and development

　　8. GPC analysis of PP, PE and other products

　　9. Dynamic mechanical analysis (DMA) of PP, PE and other products

　　10. Differential calorimetric scanning DSC of PP, PE and other products

　　11. Thermogravimetric analysis TGA of PP, PE and other products

　　12. Infrared spectrum, Raman spectrum, UV-Vis spectrophotometer, nuclear magnetic resonance NMR, solid nuclear magnetic resonance, etc. of PP, PE and other products

　　13. SEM, EDS, tem of PP, PE and other products

　　14. UL94 combustion of PP, PE and other products and other standard horizontal and vertical combustion, combustion oxygen index, glow wire, etc

　　15. High and low temperature, damp heat aging, UV aging and xenon lamp aging of PP, PE and other products

　　16. Evaluation scheme design and solution provision of PP, PE and other products

　　17. Material failure analysis, life analysis, X-ray flaw detection, industrial CT, etc. of PP, PE and other products

　　18. Training, teaching and other services for PP, PE and other materials

　　19. Odor test and VOC test of PP, PE and other materials

　　20. Halal certification and Jewish certification of PP, PE and other materials

　　21. UL yellow card certification of PP, PE and other materials

　　22. Environmental protection certification of PP, PE and other materials: RoHS, reach, PAH, MSDS, CHCC, cp65, BPA, TSCA, o-benzene, GB plasticizer, BPA, halogen, en71-1, ASTM F963, etc